8~24 L / h Feed Amount Solvent Recovery Machine for CBD / THC / Hemp oil
—— Design
Horizontal or vertical shell-and-tube heat exchanger or plate heat exchanger, with flash vessel/separator and circulation pump.
—— Particular features
Less foul – boiling/evaporation will not take place on the heating surfaces, but in the separator. Fouling due to incrustation and precipitation in the calandria is therefore
minimised.
Optimised heat exchange surface – flow velocity in the tubes determined by the circulation pump.
| TYPE |
BML-W-10 |
| MATERIAL |
stainless steel 304/S316L |
| TEMPERATURE |
Room temp~200 ℃(oil heating not included ) |
| DIAMETER |
200 (mm) |
| HEAT EXCHANGER HTA |
0.2(m2) |
| FEED AMOUNT |
8~24(L/h) |
| VACUITY |
5mbar(depend on the nature of material and vacuum pump)(vacuum pump not included) |
| FLOOR AREA |
length*width*height=1200*800*2000 (mm)(without pump) |
| POWER |
0.5KW |
| VOLTAGE |
220V-60HZ |
What can be recovered?
Generally speaking, the following types of solutions can be successfully recovered:
Non-azeotropic solutions
Aqueous non-azeotropic solutions
Heterogeneous azeotropic solutions
Aqueous homogeneous azeotropic solutions
In more laymen terminology, a large variety of mixtures, including paint lacquers and thinners, alcohols, acetone, methanal and most solvents with a boiling point up to 300-375 degrees F. Higher boiling point solvents can also be reclaimed economically and safely through the use of vacuums, which lowers the effective boiling point. For a longer list, visit our solvent recovery page or contact an engineer today to discuss EPIC taking turnkey responsibility for your solvent recovery system.
Product Tags:
|
|
Horizontal Or Vertical Solvent Recovery Unit / Solvent Distillation Equipment Images
|
